Store-bought drain cleaners dissolve soap and light grease. They do nothing for root intrusion, grease buildup 40 feet in, or a collapsed pipe segment. Masters Plumbing Service's Drain Cleaning team in Cold Spring arrives with professional-grade augers and hydro-jetting units that actually resolve the blockage.
📞 Call +1-855-718-1500 — Book Today
Retail drain products and inexperienced plumbers share one problem: they treat the symptom, not the cause. Our approach combines the right equipment with the right diagnostic process.
Hydro-jetting is the only method that restores full pipe diameter. A cable auger punches through a blockage; a jetter removes the blockage material from the pipe wall entirely, significantly extending the interval before the next cleaning is needed.
Before recommending any clearing method, we run a push-rod camera into the drain to visually confirm blockage type and location. Grease accumulation 30 feet in looks different from a root ball at a joint or a collapsed section — and each requires a different response.
Whether it's a backed-up bathroom sink or a full house sewer drain stoppage, our team carries the right nozzle sizes and cable diameters for the specific pipe we're clearing.
We photograph or record camera footage of the drain before and after clearing so you can see exactly what was there and that it's gone. Every job comes with a flat-rate quote before any work begins — no hourly-rate surprises.
From a slow bathroom sink to a full main-line stoppage affecting every fixture in the house, our drain techs in Cold Spring, MN have the equipment and training to clear it.
Grease blockages in kitchen drain lines often occur 10–40 feet from the drain opening, past the p-trap, where the line cools and FOG solidifies. Our jetting equipment reaches and clears these deposits where a plunger or retail product cannot.
Chronic slow bathroom drains often point to a partially closed p-trap, a buildup on the overflow plate mechanism, or a drain arm pitched incorrectly. We clear the immediate clog and identify if a mechanical fix is needed to prevent fast recurrence.
When multiple fixtures are draining slowly or backing up simultaneously, the blockage is typically in the main sewer line — the 4" or 6" pipe that carries all household waste to the municipal main or septic system. We access the main line through the cleanout, run a CCTV camera to identify the obstruction type, then clear with a sectional cable machine or hydro-jetter depending on what we find.
Basement floor drains and laundry room drains often go years without cleaning and can develop sediment, lint, and mineral scale blockages. We clear these drains with an electric snake and flush thoroughly to confirm full flow before closing out the job.
A preventive jetting program documented over multiple visits gives you both clean pipes and a camera record of pipe condition over time — useful for catching structural deterioration before it causes an emergency.
Our inspection reports are accepted by real estate attorneys, home buyers, and insurers as documented evidence of drain system condition. If you're buying or selling a home in Cold Spring, a pre-purchase drain scope is one of the best $300 you can spend.
Here's exactly how a Masters Plumbing Service drain call plays out in Cold Spring, MN — from dispatch to documented clear.
Tell our dispatcher which fixtures are affected — one slow drain vs. multiple backed-up fixtures tells us whether we're likely dealing with a localized clog or a main line blockage. We schedule same-day when slots are available.
Before clearing anything, we run a CCTV camera into the line to see blockage type, location, and pipe condition. This prevents treating a structural pipe failure with a jetting pass that won't hold.
If the camera reveals a structural problem that will require repair rather than just clearing, we tell you that now rather than letting you pay for a clearing that won't last.
After clearing, we run the camera a second time to confirm the pipe is open to full diameter. You see the before-and-after footage. We provide a written service summary and our drain clearing warranty.

Called about a kitchen drain that three other plumbers had snaked without long-term success. Masters Plumbing Service ran a camera first and found grease buildup 28 feet in, past where any hand snake reaches. Hydro-jetted it, re-scoped to confirm clean, and the drain has run perfectly in the months since.
All three bathrooms drained slowly and the lowest floor toilet gurgled every time an upstairs fixture ran — classic main line partial blockage. Masters Plumbing Service's tech accessed the cleanout, ran the camera, and found root intrusion at a clay tile joint about 40 feet from the house. He cut the roots with the root cutter attachment and re-scoped to confirm clear flow. Also noted a joint offset at 68 feet that we'll need to line eventually — good to know before it becomes a full backup.
We own a rental property and schedule annual hydro-jet maintenance with Masters Plumbing Service. The jetting intervals have gotten the drain-related tenant calls down to nearly zero. The camera documentation each year also gives us a clear record of pipe condition over time.

Masters Plumbing Service provides professional Drain Cleaning across Cold Spring and the surrounding Cold Spring, MN service area. Same-day service is available on most calls — call to check today's availability.

Stop pouring chemicals down the drain and getting two-day results. Our drain techs in Cold Spring, MN use the right equipment to clear it properly and confirm it's clear on camera before we leave.
📞 Call +1-855-718-1500 Now